Electro-magnetic vibrator type UOWP
Electro-magnetic vibrator is designed to induce linear vibrations. It has a wider application as a drive for vibrating feeders and dispensers. The vibrator can also be used for other purposes, such as a drive for vibrating sieves, as a material hang-up prevention inductor in containers and bunkers.
Question about a product
Electro-magnetic vibrator type UOWP
Advantages:
- stepless adjustment of capacity during operation
- lack of friction elements
- ability of remote control
Intended use:
Electro-magnetic vibrator is designed to induce linear vibrations. It has a wider application as a drive for vibrating feeders and dispensers. The vibrator can also be used for other purposes, such as a drive for vibrating sieves, as a material hang-up prevention inductor in containers and bunkers. The vibrator is characterised by simplicity of stepless capacity adjustment, power supply via thyristor-controller power supplier allowing for adjustment of the output voltage during operation, and thus the adjustment of the vibrator’s vibration amplitude rate. Thyristor- controlled power supplier also allows for remote control of processing via the output power. Accurate dosage can be obtained with the use of two switchable ranges of vibrator control, i.e. transport and dosage. Equipment description: Electro-magnetic vibrator is comprised of a base for mounting the vibrator to the driven device, body, set of flat springs and an electro-magnet with a keeper. The entire vibrator is enclosed with a cover. The electro-magnet is mounted to the body in which the ends of the spring set are embedded. The centre part of the spring set is screwed with bolts to the vibrator base and electromagnet keeper. An opening of a specific size is obtained between the electro-magnet and the keeper as result of adjustment. The device has no friction elements, thus it is not subject to substantial wear and tear, necessity of performing maintenance or lubrication. Connection of the electro-magnet (via a thyristor-controlled power supplier) to the power network causes vibrations of the keeper and the vibrator’s base. The vibration amplitude rate is dependent on the stiffness of the spring set and the voltage rate of the electro-magnet coil. Technical parameters are presented in the attached table. Vibrators can be supplied with an output voltage of 230V, 400V and 500V in accordance to the needs of the Customer.
For the best selection of the equipment please contact our technical office, tel.: +48 77/470 04 97.
